The mixing tank is a commonly used intermediate buffer, liquid storage, mixing and blending equipment in the chemical, pharmaceutical, biological engineering, coatings, resin, food, building materials, beverages, fruit wine, pigments, condiments, fine chemicals, grease, scientific research and other industries.
The mixing tank is a single-layer, vertical structure sanitary clean container equipment. And according to the process requirements, the structure with insulation or heating insulation layer can be added.
The tank structure includes: upper movable cover, lower cone (or oval or butterfly head) structure, upper movable cover, and lower inclined bottom structure. Upper and lower oval (butterfly) head structure Upper and lower cone head structure
Level gauge form: glass tube level gauge static pressure sensor level gauge ultrasonic level gauge radio frequency capacitive level gauge, etc.
Stirring tank stirring device: (eccentric) stirring in the top of the tank, the stirring form includes frame anchor type propeller blade type, etc.
Foot form: adjustable triangular pyramid type or round tube type.
Equipment accessories configuration: quick installation sanitary manhole, peep light, respirator, CIP cleaning, material and liquid inlet and outlet, sterilization port and other interfaces.
Mixing tank structure
The mixing tank is composed of a mixing tank, upper and lower ends, agitators, supports, transmission devices, shaft sealing devices, etc., and heating or cooling devices can also be configured according to process requirements.
The materials for the mixing tank, mixing tank cover, agitator, shaft seal, etc. can be made of carbon steel or stainless steel according to different process requirements.
The tank body and the mixing tank cover can be connected by flange sealing or welding. The mixing tank body and the mixing tank cover can be opened according to the process requirements for feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, safe venting and other process pipe holes.
The upper part of the mixing tank cover is equipped with a transmission device (motor or reducer), and the agitator in the mixing tank is driven by the transmission shaft.
The shaft sealing device can adopt various forms such as mechanical seal or packing, labyrinth seal (determined according to user needs).
Due to the different production process requirements of users, the agitator can be configured with various forms such as paddle type, anchor type, frame type, and spiral type. If you have other requirements, please contact our factory to design and produce separately.
The mixing tank is also known as mixing tank and batching tank. It can be made of carbon steel, stainless steel and other materials according to the process requirements of the user's product, and heating and cooling devices can be set to meet different process and production needs.

2. Mixing tank
Generally, the unit of use depends on whether the material is heated or dried or cooled. In the customized range, the temperature should be below 200℃ and the working pressure should be lower than 0.1Mpa. The heating method can be determined according to the production conditions of the user. The heating method of heating mixing tank generally adopts jacket or coil electric heating, steam heating, hot water circulation heating, and heat transfer oil circulation heating.
The electric heating mixing tank is a single-layer, vertical structure sanitary clean container equipment. And according to the process requirements, the structure with insulation or heating insulation layer can be added.

Mixing tank structure
The electric heating stirring tank is composed of an electric heating stirring tank, upper and lower ends, agitators, supports, transmission devices, shaft sealing devices, etc., and heating or cooling devices can also be configured according to process requirements.
The electric heating stirring tank body, electric heating stirring tank cover, stirrer, shaft seal and other materials can be made of carbon steel or stainless steel according to different process requirements.
The electric heating stirring tank body and the electric heating stirring tank cover can be connected by flange sealing or welding. The electric heating stirring tank body and the electric heating stirring tank cover can open the process pipe holes for feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, and safe venting according to the process requirements.
The upper part of the electric heating mixing tank is equipped with a transmission device (motor or reducer), and the agitator in the electric heating mixing tank is driven by the transmission shaft.

Heat transfer oil circulation heats the medium circulation of hot oil and other media. After the heat transfer oil is heated to a certain temperature in a separate heating tank, it is transported through a hot oil pump; direct heating is to install an electric heating tube directly on the jacket to heat the heat transfer oil to Required temperature (temperature can be adjusted according to actual conditions).
3. The mixing tanks/heating mixing tanks produced by our company are all made of imported sanitary stainless steel materials, so they are called stainless steel mixing tanks/heating mixing tanks/mixing liquid mixing tanks and so on. Stainless steel (electric heating) mixing tank-made of its structure, design specifications, etc. Welcome to inquire